| Management number | 230914126 | Release Date | 2026/06/18 | List Price | US$74.80 | Model Number | 230914126 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
<p>Material: Aluminum, Iron, Plastic<br>Process: Spray Molding, Welding<br>Color: Red<br>Engine Type: Single-cylinder, 4-stroke, Air-cooled<br>Starting Mode: Manual<br>Power: 4.8kw<br>Horsepower: 7.5hp<br>Fuel Type: Gasoline<br>Fuel Tank Capacity: 3.6L/0.95Gal<br>Fuel Consumption Rate: 360ml/kw.h<br>Engine Oil Capacity: 0.6L/0.16Gal<br>Speed: 3600rpm<br>Displacement: 210cc<br>Noise: About 96dB<br>Intake and Outlet Diameter: 5cm/2inch<br>Pump Lift: 32m/105ft<br>Pump Output: 36m³/h/1271.33ft³/h (9510GPH)<br>Self-suction Height: 8m/26.25ft<br>Product Size: 50*37*40cm/19.7*14.57*15.75inch<br><br><b>Enlarged Inlet and Outlet:</b> Its inlet and outlet have been enlarged to a diameter of 2.99 inches, which allows for a larger flow rate for a wider range of watering and suction.<br><br><b>Air & Water Filters:</b> The filters can effectively isolate impurities in water and air, prevent blockage of water pipes and water pumps, and improve working efficiency. <br><br><b>Snap-on Fuel Tank Cap:</b> It makes the fuel tank seal better, reduces evaporation, and saves fuel.<br><br><b>Application:</b><br>It can be used for agricultural irrigation, treatment of industrial wastewater, tunnel drainage, road cleaning, alpine water conveyance, flood control and drainage, engineering construction, water extraction from machine wells, fire-fighting water, fishpond aquaculture, and so on.<br><br><b>Initiation Step:</b><br>1. Switch to "ON".<br>2. Connect the inlet hose and filter.<br>3. Close the damper and open the gasoline switch.<br>4. Start the machine.<br>5. Open the damper.<br>6. Adjust the speed control seat.<br><br><b>Water Pipe Installation Step:</b><br>1. Place the gasket in the joint.<br>2. Rotate to install the joint and tighten it.<br>3. Install the water pipe clamp.<br>4. The installation is completed.<br><br><b>Package Included:</b><br>1* Water Pump<br>1* Inlet Pipe Connection<br>1* Outlet Pipe Connection<br>1* Sleeve Rod<br>1* Filter<br>4* Foot Pads<br>1* English Manual<br>Other Accessories for Assembly<br><br><b>Notes:</b><br>Please fill the pump head with water before starting to avoid damaging the pump head. The machine needs to be filled with gasoline and four-stroke engine oil before use to prevent cylinder explosion due to insufficient lubrication and overheating.<br>Please do not use the machine indoors or in a damp environment. Please keep the product away from inflammable items.<br>Please turn off the machine and do not smoke when refueling. Please do not add excessive fuel to avoid potential danger caused by fuel overflow.<br>Please read the manual completely before use, and pay particular attention to the safety instructions included.<br>Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.</p>
| Gallons per minute | 158.5 GPM |
|---|---|
| Horsepower | 7.5 HP |
| Plumbing pump type | Semi Trash Water Pump |
| Fuel type | Gasoline |
| Power type | Gas |
| Brand | Kkonetoy |
| Features | Durable, Impact-Resistant |
| Assembled product height | 15.75" |
| Weight | 48.4 lb |
| Has written warranty | No |
| Has nrtl listing certification | N |
| Watts | 4.8 kW |
| Decibel rating | 96 dB |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form